Ariston Genus 27 Plus User Manual download pdf (Page 6)

403

Installation with a room thermostat:

- Turn the “C” selector knob to < >;

- Turn on the power supply to the boiler by pressing the On/Off switch

”L”; the green L.E.D. will then turn on;

- Turn the thermostat knob “H” to the highest temperature setting.

- With this type of installation, the boiler is controlled by a room

thermostat

. Therefore, it runs until the ambient temperature has reached the

temperature setting on the thermostat. At that point, the main burner

will turn off and the circulation pump will stop.

TURNING OFF THE CENTRAL HEATING

Installation without a room thermostat:

To turn off the heating, turn the “C” selector knob to < >. The boiler

will still provide hot water for domestic use.

ADJUSTING THE HEATING TEMPERATURE

To economise on consumption while achieving the highest level of

comfort, the temperature adjustment knob is designed with three

different heating zones based on the temperature outside the home.

Rotate the knob “H” as shown below.

PRODUCTION OF HOT WATER

FOR DOMESTIC USE

- Turn on the power to the boiler by pressing the On/Off switch “L”;

- Turn the “C” selector knob to <> or < > (in this position no

central heating is produced);

- Turn the “E” knob to select the temperature for the hot water

(between 40°C and about 70°C).

ADJUSTING THE TEMPERATURE OF

WATER FOR DOMESTIC USE

It is recommended that the temperature for the hot water should not be

set to high temperatures and then mixed with cold water. Setting the

thermostat to medium temperatures is preferable

(see figure)

•

From +5°C

to +15°C

Lower

than -5°C

From +5°C

to -5°C

UT008Af

UT008Ag

•

UT008Ai

•

UT008Al

UT008Ah

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Ariston Genus 27 Plus User Manual Page 6

Comments to this Manuals

Related products and manuals for Water heaters & boilers Ariston Genus 27 Plus