Ariston CP 859 MT X AUS S Specifications download pdf (Page 7)

5AUS

HOW TO KEEP YOUR OVEN IN SHAPE

Important: The appliance should be disconnected from

the mains supply before starting cleaning operations.

To ensure a long life cycle for the appliance, it is essential

to carry out a thorough general clean frequently, while

observing the following instructions:

Inside the oven door:

Clean the surface with a cloth moistened with hot water

and non abrasive liquid detergent, then rinse and dry

thoroughly.

Inside the oven:

• The inside of your oven is coated with a special self-

cleaning microporous enamel glaze which, at a normal

cooking temperature of between 200 and 300°C, oxidises

and completely eliminates all grease spots or other

substances that inevitably attack the inner walls of the

oven. This way, cleaning is kept right down to a minimum:

as a matter of fact, you just need to rub the surfaces of

the oven with a wet cloth regularly, after cooking, to

remove the thin layer of ash that may have been

deposited during cooking, in order to maintain the self-

cleaning property of the oven intact.

• After cooking where liquid has overflowed or when the

dirt has not been eliminated completely (for example

when grilling food, and the temperatures reached are

not high enough for the full self-cleaning action of the

enamel to be performed), we recommend you leave the

oven on at maximum temperature so that all grease

residue and the like are eliminated.

• If, after long-term use, you find evident grease stains

deposited on the self-cleaning oven walls, probably due

to your failing to follow the above maintenance advice,

clean the surfaces thoroughly with hot water and a soft

cloth (do not use any detergents), then rinse and dry

thoroughly.

• Do not remove any dry caked-on grease using sharp

objects, as these could etch the self-cleaning coating.

• If the self-cleaning surfaces inside the oven are damaged

or worn, due to incorrect or poor maintenance or after

many years of use, you can request a kit of self-cleaning

panels to line the inside of the oven. To order these, just

contact an authorised Service Centre.

Before cleaning your oven, or performing maintenance,

disconnect it from the power supply.

To extend the life of your oven, it must be cleaned frequently,

keeping in mind that:

• The self-cleaning panels (if present) and the enameled

parts should be washed with warm water - abrasive

powders and corrosive substances should be avoided;

• The inside of the oven should be cleaned immediately

after use with warm water and soap; the soap should

be rinsed away and the interior dried thoroughly;

• Stainless steel can be stained if it remains in contact

with agressive detergents (containing phosphorus) or

water with a high lime content. We recommend that you

rinse these parts thoroughly and dry them well after

fig 4a

fig 4b

cleaning. It is also a good idea to dry any water spills;

• Never line the bottom of the oven with aluminium foil

because the buildup of heat will not only impede the

cooking process, but could also damage the enamel.

Replacing the Lamp in the Oven

• Cutoff the supply of power to the oven by turning off the

omni-polar switch connecting it to the mains, or by

removing the plug if it is accessible;

• Unscrew the glass cover attached to the lamp holder;

• Unscrew the lamp and replace it with another high-tem-

perature lamp (300°C) with the

following characteristics:

- Voltage: 230/240 V

- Wattage: 15W

- Socket: E14

• Remount the glass cover and

reconnect the appliance to the

power supply.

Worning:

During operation, the oven glass door and adjacent parts

of the appliance become hot. Make sure, therefore, that

children do not touch the appliance.

Disassembling/assembling the oven door

To make it easier to clean the inside of your oven, the oven

door can be removed, by proceeding as follows (fig. 4a-

4b):

• Open the door completely and lift the 2 levers “B” (fig.

4a);

• Now, shutting the door slightly, you can lift it out by pulling

out the hooks “A” as shown in figure 4b

To reassemble the door:

• With the door in a vertical position, insert the two

hooks “A” into the slots;

• Ensure that seat “D” is hooked perfectly onto the edge

of the slot (move the oven door backwards and forward

slightly);

• Keep the oven door open fully, unhook the 2 levers “B”

downwards and then shut the door again.

Greasing the taps

As time passes, a tap may lock or become difficult to turn.

In this case it will be necessary to clean inside and replace

the grease. This procedure must be performed by a

technician authorized by the manufacturer.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Ariston CP 859 MT X AUS S Specifications Page 7

Comments to this Manuals

Related products and manuals for Hobs Ariston CP 859 MT X AUS S