Important Safety InstructionsThe front, the backCon
This washer is a complex machine. Repairing it yourself or having a non-authorized person try to repair it could cause harm to one or mor
The installation spacing is
Assemble the necessary tools and supplies before beginning the washer installation. The parts supplied are in the drum.Tools needed f
The washer-dryer can be installed using the standpipe drain system, floor drain system or the sink drain system. To prevent
• A 120-volt, 60-Hz., AC-only, 15 or 20-amp, fused electrical supply is required. Time-delay fuse or circuit breaker is reco
First, position the washer so that the rear of the unit is within approximately 3 feet (90 cm) of the final location
2. Attach the hose connected to the ‘H’ valve to the hot water faucet. Screw on the coupling BY HAND until it is seated on the gasket. DO NOT OVER
ELECTRICAL SHOCK HAZARDPlug washer-dryer into a grounded 3 prong outlet.Do not remove ground prong.Do not use adapter.Do no
Read all instructions before using the appliance.Do not wash articles that have been previously cleaned in, washed in, or spotted with gasoline, dry
© Copyright 2006, Westland Sales, Clackamas, OR 97015www.westlandsales.com
(Pull on Grey Tab)Knobs
Plug the washer into the electrical socket.Sort your laundry according to similar colors, fabrics and degree of s
(10 - 13 min.)(Anticrease Stop)(No Spin)(25 min.)
Changes the preset wash water temperature of the selected program Rotate
For best results, use HE (High Efficiency) detergent. HE laundry detergents dissolve more quickly in less water and won’t overfoam in
Unplug the washer and turn off the water faucets when not using it, when cleani
With machine power OFF, pour ½ quart of RV-type antifreeze into washer drum Close door. Advance
Comments to this Manuals