Ariston TVM63X NA Service Manual download pdf (Page 18)

18 of 19

Service Manual UK

Indesit

Company

English

T Rear Seal

1. Remove the drum as in (Q).

2. Remove the rear seal and clean any remnants of the seal and adhesive from the inner face of the

inner back panel. Fit the new seal using adhesive Part No. C00981027 (981027).

UMotor

1. Remove the right hand side panel as in (F).

2. Remove the heater cover - 8 screws.

3. Remove the 2 fans from the motor hub - 3 hex head screws.

Note: The inner and outer fans are DIFFERENT.

Ensure fans are reassembled in the correct order.

4. Note the wiring connections and disconnect the motor at the in-line connector and the capacitor.

5. Disengage the drive belt from the motor shaft as in (O2).

6. Remove the 3 hex head screws securing the motor to the motor cradle.

7. Remove the 2 screws securing the cradle to the base panel if necessary.

Note: When refitting the heater cover ensure that the heater wiring is not trapped between

the heater cover and rear panel.

Raised

Recessed Hub

Motor Fans - Orientation

Hub

Inner

Outer

Inner

Outer

1 2 ... 13 14 15 16 17 18 19

No comments

Ariston TVM63X NA Service Manual Page 18